Total for minimum order (2 pcs): €200.70
Road Series · min. order 2 pcs · fits 2 vehicles
We help you choose the right equipment.
Fast shipping across the EU.
Secure payment and expert support.
Front Wishbone Rear Bush, Caster Offset from Powerflex (part number PFF5-5601G-60) is a polyurethane replacement for the original rubber bush, fitted to BMW 3 Series.
Road Series bushes use Powerflex purple 80A polyurethane: tighter and more precise than worn rubber, while keeping everyday comfort.
| Vehicle | Qty per vehicle | Notes |
|---|---|---|
| BMW › 3 Series › E46 (1999 - 2006) › E46 Compact | 2 | PFF5-5601G-60 offers additional +0.33 of caster over PFF5-5601-60 and is a high performance option to PFF5-4601-60, and aimed at offering greater precision for people wanting the very best from their E46 or Z4. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. PFF5-5601-60 is for the earlier models with 60mm bore mounting bracket. Please ensure you have the correct size bush before fitting. Testing during the development of this bush has indicated stiffness gains of 128% compared with the original rubber bush. Our Black Series part increases siffness by 28%, to give an 190% increase in stiffness over the original part |
| BMW › 3 Series › E46 (1999 - 2006) › E46 Coupe / Conv / Sedan / Touring | 2 | PFF5-5601G-60 offers additional +0.33 of caster over PFF5-5601-60 and is a high performance option to PFF5-4601-60, and aimed at offering greater precision for people wanting the very best from their E46 or Z4. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. PFF5-5601-60 is for the earlier models with 60mm bore mounting bracket. Please ensure you have the correct size bush before fitting. Testing during the development of this bush has indicated stiffness gains of 128% compared with the original rubber bush. Our Black Series part increases siffness by 28%, to give an 190% increase in stiffness over the original part |
Data sheet
Specific References
Download
Review sent
Your review cannot be sent
Road Series · min. order 2 pcs · fits 2 vehicles
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent