Total for minimum order (2 pcs): €751.82
Black Series · min. order 2 pcs · fits 7 vehicles
We help you choose the right equipment.
Fast shipping across the EU.
Secure payment and expert support.
Front Wishbone Rear Bush Anti-Lift & Caster Offset from Powerflex (part number PFF19-1802GBLK) is a polyurethane replacement for the original rubber bush, fitted to Ford Focus, Kuga, Transit, Mazda 3, Volvo V40.
Black Series bushes use Powerflex black 95A polyurethane for track days, rally and motorsport: maximum precision and stability.
| Vehicle | Qty per vehicle | Notes |
|---|---|---|
| Ford › Focus Models › Focus Mk3 inc ST and RS (2011-2018) › Focus MK3 RS (2016-2018) | 2 | PFF19-1802GBLK is a CNC machined aluminium mount and polyurethane bush to provide 1 degree of positive caster offset and 7.5mm anti-lift properties. It will not fit later C-Max and Mk3 Focus models using aluminium front wishbones. Focus RS and ST owners are all too familiar with torque steer and wheel hop.Proven and tested on the road and track, PFF19-1802G alters the steering geometry to prevent the front of the vehicle from lifting (i.e., anti-lift) during acceleration, thereby improving traction and cornering grip under power. By adding 1 degree of static caster offset, this part increases in-corner camber gain, enhancing tire-to-tarmac surface contact for greater grip and reduced understeer.The increased caster angle also produces more weight and detail in the steering, which is vital for driver confidence, providing greater feedback and stability. Starting out as a solid billet of 6082 T6 (heat-treated) aluminium, it is CNC-machined in our in-house machining centre to our unique design, which is then hard black anodised and laser-etched. This process ensures the best strength-to-weight ratio for performance while looking great once fitted. This part ships with CNC-machined stainless-steel sleeves and thrust washers. Our Purple 80ShA Road Series option is 10% stiffer than the original Ford rubber bush, while the Black Series 95ShA option is 85% stiffer for those looking for a track/competition option. |
| Ford › Focus Models › Focus Mk3 inc ST and RS (2011-2018) › Focus Mk3 (2011-2018) | 2 | PFF19-1802GBLK is a CNC machined aluminium mount and polyurethane bush to provide 1 degree of positive caster offset and 7.5mm anti-lift properties. It will not fit later C-Max and Mk3 Focus models using aluminium front wishbones. Focus RS and ST owners are all too familiar with torque steer and wheel hop.Proven and tested on the road and track, PFF19-1802G alters the steering geometry to prevent the front of the vehicle from lifting (i.e., anti-lift) during acceleration, thereby improving traction and cornering grip under power. By adding 1 degree of static caster offset, this part increases in-corner camber gain, enhancing tire-to-tarmac surface contact for greater grip and reduced understeer.The increased caster angle also produces more weight and detail in the steering, which is vital for driver confidence, providing greater feedback and stability. Starting out as a solid billet of 6082 T6 (heat-treated) aluminium, it is CNC-machined in our in-house machining centre to our unique design, which is then hard black anodised and laser-etched. This process ensures the best strength-to-weight ratio for performance while looking great once fitted. This part ships with CNC-machined stainless-steel sleeves and thrust washers. Our Purple 80ShA Road Series option is 10% stiffer than the original Ford rubber bush, while the Black Series 95ShA option is 85% stiffer for those looking for a track/competition option. |
| Ford › Focus Models › Focus Mk3 inc ST and RS (2011-2018) › Focus Mk3 ST (2012-2018) | 2 | PFF19-1802GBLK is a CNC machined aluminium mount and polyurethane bush to provide 1 degree of positive caster offset and 7.5mm anti-lift properties. It will not fit later C-Max and Mk3 Focus models using aluminium front wishbones. Focus RS and ST owners are all too familiar with torque steer and wheel hop.Proven and tested on the road and track, PFF19-1802G alters the steering geometry to prevent the front of the vehicle from lifting (i.e., anti-lift) during acceleration, thereby improving traction and cornering grip under power. By adding 1 degree of static caster offset, this part increases in-corner camber gain, enhancing tire-to-tarmac surface contact for greater grip and reduced understeer.The increased caster angle also produces more weight and detail in the steering, which is vital for driver confidence, providing greater feedback and stability. Starting out as a solid billet of 6082 T6 (heat-treated) aluminium, it is CNC-machined in our in-house machining centre to our unique design, which is then hard black anodised and laser-etched. This process ensures the best strength-to-weight ratio for performance while looking great once fitted. This part ships with CNC-machined stainless-steel sleeves and thrust washers. Our Purple 80ShA Road Series option is 10% stiffer than the original Ford rubber bush, while the Black Series 95ShA option is 85% stiffer for those looking for a track/competition option. |
| Ford › Kuga Models › Kuga MK2 (2012-2019) | 2 | PFF19-1802GBLK is a CNC machined aluminium mount and polyurethane bush to provide 1 degree of positive caster offset and 7.5mm anti-lift properties. It will not fit later C-Max and Mk3 Focus models using aluminium front wishbones. Focus RS and ST owners are all too familiar with torque steer and wheel hop.Proven and tested on the road and track, PFF19-1802G alters the steering geometry to prevent the front of the vehicle from lifting (i.e., anti-lift) during acceleration, thereby improving traction and cornering grip under power. By adding 1 degree of static caster offset, this part increases in-corner camber gain, enhancing tire-to-tarmac surface contact for greater grip and reduced understeer.The increased caster angle also produces more weight and detail in the steering, which is vital for driver confidence, providing greater feedback and stability. Starting out as a solid billet of 6082 T6 (heat-treated) aluminium, it is CNC-machined in our in-house machining centre to our unique design, which is then hard black anodised and laser-etched. This process ensures the best strength-to-weight ratio for performance while looking great once fitted. This part ships with CNC-machined stainless-steel sleeves and thrust washers. Our Purple 80ShA Road Series option is 10% stiffer than the original Ford rubber bush, while the Black Series 95ShA option is 85% stiffer for those looking for a track/competition option. |
| Ford › Transit › Transit Connect MK2 - (2013 - 2021) | 2 | PFF19-1802GBLK is a CNC machined aluminium mount and polyurethane bush to provide 1 degree of positive caster offset and 7.5mm anti-lift properties. It will not fit later C-Max and Mk3 Focus models using aluminium front wishbones. Focus RS and ST owners are all too familiar with torque steer and wheel hop.Proven and tested on the road and track, PFF19-1802G alters the steering geometry to prevent the front of the vehicle from lifting (i.e., anti-lift) during acceleration, thereby improving traction and cornering grip under power. By adding 1 degree of static caster offset, this part increases in-corner camber gain, enhancing tire-to-tarmac surface contact for greater grip and reduced understeer.The increased caster angle also produces more weight and detail in the steering, which is vital for driver confidence, providing greater feedback and stability. Starting out as a solid billet of 6082 T6 (heat-treated) aluminium, it is CNC-machined in our in-house machining centre to our unique design, which is then hard black anodised and laser-etched. This process ensures the best strength-to-weight ratio for performance while looking great once fitted. This part ships with CNC-machined stainless-steel sleeves and thrust washers. Our Purple 80ShA Road Series option is 10% stiffer than the original Ford rubber bush, while the Black Series 95ShA option is 85% stiffer for those looking for a track/competition option. |
| Mazda › Mazda 3 › Mazda 3 BL (2009-2013) | 2 | PFF19-1802GBLK is a CNC machined aluminium mount and polyurethane bush to provide 1 degree of positive caster offset and 7.5mm anti-lift properties. It will not fit later C-Max and Mk3 Focus models using aluminium front wishbones. Focus RS and ST owners are all too familiar with torque steer and wheel hop.Proven and tested on the road and track, PFF19-1802G alters the steering geometry to prevent the front of the vehicle from lifting (i.e., anti-lift) during acceleration, thereby improving traction and cornering grip under power. By adding 1 degree of static caster offset, this part increases in-corner camber gain, enhancing tire-to-tarmac surface contact for greater grip and reduced understeer.The increased caster angle also produces more weight and detail in the steering, which is vital for driver confidence, providing greater feedback and stability. Starting out as a solid billet of 6082 T6 (heat-treated) aluminium, it is CNC-machined in our in-house machining centre to our unique design, which is then hard black anodised and laser-etched. This process ensures the best strength-to-weight ratio for performance while looking great once fitted. This part ships with CNC-machined stainless-steel sleeves and thrust washers. Our Purple 80ShA Road Series option is 10% stiffer than the original Ford rubber bush, while the Black Series 95ShA option is 85% stiffer for those looking for a track/competition option. |
| Volvo › V40 (2012 - 2019) | 2 | PFF19-1802GBLK is a CNC machined aluminium mount and polyurethane bush to provide 1 degree of positive caster offset and 7.5mm anti-lift properties. It will not fit later C-Max and Mk3 Focus models using aluminium front wishbones. Focus RS and ST owners are all too familiar with torque steer and wheel hop.Proven and tested on the road and track, PFF19-1802G alters the steering geometry to prevent the front of the vehicle from lifting (i.e., anti-lift) during acceleration, thereby improving traction and cornering grip under power. By adding 1 degree of static caster offset, this part increases in-corner camber gain, enhancing tire-to-tarmac surface contact for greater grip and reduced understeer.The increased caster angle also produces more weight and detail in the steering, which is vital for driver confidence, providing greater feedback and stability. Starting out as a solid billet of 6082 T6 (heat-treated) aluminium, it is CNC-machined in our in-house machining centre to our unique design, which is then hard black anodised and laser-etched. This process ensures the best strength-to-weight ratio for performance while looking great once fitted. This part ships with CNC-machined stainless-steel sleeves and thrust washers. Our Purple 80ShA Road Series option is 10% stiffer than the original Ford rubber bush, while the Black Series 95ShA option is 85% stiffer for those looking for a track/competition option. |
Data sheet
Specific References
Download
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Black Series · min. order 2 pcs · fits 7 vehicles
check_circle
check_circle